Height adjuster FROG 200S

◆ FROG-200S is a capacitive distance sensor and controller (hereinafter referred to as FROG-200S).

     ◆ During the laser cutting process, due to factors such as uneven workpieces and high-pressure cutting gas injection, the distance between the nozzle and the workpiece surface is not constant, which will have a negative impact on the cutting effect and even damage the nozzle.

     ◆   FROG-200S distance adjustment box can keep the distance between the nozzle and the workpiece surface constant during high-speed laser cutting, protect the nozzle from colliding with the workpiece, and greatly improve the cutting effect.

Performance description

◆       Capacitance sampling rate 1000 times per second.

◆       Static measurement accuracy is 0.001 mm.

◆       Height measurement range 0-25 mm.

◆       When the length of the amplifier signal transmission cable reaches 100 meters, the signal will not attenuate and has strong anti-interference ability.

◆       Supports network communication, U disk upgrade and network online firmware upgrade.

◆       Supports jitter suppression function, which can effectively suppress jitter caused by air blowing and scum.

◆       Can be adapted to any cutting head and nozzle, and the capacitance parameters are adaptive.

◆       Supports plate touch alarm, nozzle electrode loss detection alarm, and sensor disconnection alarm.

◆       Supports 1-point, 2-point and 16-point capacitance calibration, and supports display of the calibrated curve.

◆       Supports real-time calibration of capacitance, which can effectively solve the impact of temperature and other factors on capacitance sensors.

◆       16-bit DA output, output voltage (±10V) signal in sensor control mode, or distance measurement mode. Linear height signal with output voltage (0-10V),                   update cycle 1000 times per second.

◆       14-bit AD input, detects external analog voltage signal (0V-10V) and adjusts the static distance in real time.

◆       Supports oscilloscope function, which can monitor changes in capacitive sensors in real time.

◆       Supports display diagnostic test and can detect AD/DA and IO changes in real time.

◆       Support EtherCAT bus communication (optional).

Get An Instant Quotation

For all inquiries, please fill in the form below (* are required) to send us a brief message, and we will get back to you as soon as possible.