Height adjuster FROG 100L
◆ FROG 100L independent capacitor height controller (hereinafter referred to as FROG 100L) uses a closed-loop control method to control the laser cutting capacitor follower head. It is a high-performance capacitor height controller.
◆ In addition to similar control methods to other products, FROG 100L also provides an Ethernet communication interface (TCP/IP protocol), which can be used with laser cutting software to easily achieve highly automatic tracking, segmented perforation, progressive perforation, and edge-finding cutting. , leapfrog lifting, cutting head lifting height can be set arbitrarily and other functions, its response speed is also greatly improved.
◆ In terms of servo control, because FROG 100L adopts a speed-position double closed-loop algorithm, its operating speed and accuracy are significantly better than similar products at home and abroad.
Performance description
◆ Sampling rate 1000 times per second.
◆ Static measurement accuracy is 0.001 mm.
◆ Dynamic response accuracy is 0.05 mm.
◆ Height follow-up control range 0-15 mm.
◆ Maximum acceleration 2G.
◆ The upper limit of following speed depends on the upper limit of servo motor speed and screw lead. (10 mm lead screw and 6000 rpm
Servo, the maximum following speed can reach 1000 mm/second. )
◆ When the signal transmission cable length reaches 100 meters, the signal will not attenuate and has strong anti-interference ability.
◆ Support network communication and U disk online upgrade.
◆ Can be adapted to any cutting head and nozzle, and the capacitance parameters are adaptive.
◆ Supports alarm when hitting the board and alarm when exceeding the edge.
◆ Support edge detection and automatic edge finding.
◆ One-click calibration process, fast, simple and convenient operation.
◆ Supports leapfrog lifting, segmented perforation, and the lifting height can be set arbitrarily.
◆ Supports oscilloscope function, which can detect capacitance and height changes in real time.
