Dual Fuel Burner
TLS/2 Series
The output range of TLS 28-38 series burner is 100 – 580 kW.This series burner can be designed for hot water or superheated water boilers, hot air generators or steam Boiler, heat conduction oil furnace. The adjustment mode of this series burner is “two stage fire”; The burner is equipped with an electronic device – status display screen, which can comprehensively diagnose the burner,including operating hours, ignition times and fault information diagnosis. Fans with forward inclined blades and silencing materials are installed at the fan inlet to ensure the lowest noise emission.The performance improvement of fan and burner ensures that the burner operates well within its full output range.
TLS/M Series
DS/M.The output range of BLU series burner is 44 -2400 kw,which is applicable to medium and low temperature hot water boiler,hot water or steam boiler Heat conduction oil furnace.The burner is in smooth two-stage fire operation mode,which can also be realized by adding a PID comparator and corresponding probe,”Proportional adjustment”operation mode.DS/M BLU series burners can ensure the system to maintain efficient operation in various applications,reduce fuel consumption and operating costs.
The unique design of the burners reduces the size of the equipment,making it easy to use and maintain.The use of specially designed air duct loops and silencing materials greatly reduces noise emissions.Multiple series of optional accessories enhance the flexibility of equipment operation.
GI M Series
The output range of GI/EEM1400-4500 series burners is 407-4650kW.This series is specially designed for users with large output demand,and can match various types of boilers with ordinary or pressurized furnaces.
This series of burners are operated in the “smooth two section fire”mode.If the PID comparator and probe are installed,they can also be operated in the “proportional adjustment”mode.This series of burners can use gas or fuel oil for two operation modes,and the required operating fuel can be changed through the change-over switch.The light oil circuit is equipped with a motor:therefore,the oil pump stops when using the fuel gas to prevent the oil pump from being blocked and the fuel from entering the fuel gas circulating pipeline.
A series of optional accessories and gas valve groups ensure the flexibility of burner operation to the greatest extent.
DS/E BLU series
DS 310 -410-800-900/E BLU burner is characterized by its overall structure,which means that all necessary components are combined in one unit,making installation easier and faster.Burners can burn from 500 to 9500 kilowatts and are designed for hot water boilers or industrial steam generators.
The operation can be two-stage progressive,or alternatively,PID logic regulator can be installed for ‘modulation’ or external 4-20mA/0 -10V signal.The electronic calibration is used for adjustment.Therefore,the burner can accurately supply the required power,ensure the high efficiency of system liquid level and stability settings,obtain fuel consumption and reduce operating costs.The combustion head is equipped with advanced analog design equipment to reduce pollution emissions (NOx<80 mg/kWh).
TS/M series
The output range of TS/M series burner is 45-2715 kW,
It is applicable to medium and low temperature hot water boilers,hot air and steam boilers and heat transfer oil furnaces.
The operation mode of this series of burners is ‘smooth two stage fire”.TS series burners can achieve efficient operation in all application fields,reducing fuel consumption and operating costs.The unique design ensures that the equipment is compact and easy to use and maintain.All kinds of accessories are complete,ensuring the flexibility of work.
Gas/M Series
The GAS powder metallurgy series covers an ignition range of 870 to 4885 kilowatts. The operation is characterized by gradual two-stage operation or full modulation,with advanced modulation control system and probe.Gas powder metallurgy series burners include those that are very suitable for applications requiring multi-function control (process,steam,refrigeration absorption),where one variable needs to be output.
Because of their sheet metal construction, they are particularly suitable for processing applications of plastic materials that may be easily damaged or deformed. The simplified maintenance is realized by sliding rod, which can access the burner of the combustion head boiler without disassembly.
DS/M Blue Series
CUSO DS2-5/M series smooth two-stage fire and proportional regulation gas burners are low NOx emission products,which are specially developed to meet various household heating needs and meet the most stringent pollution emission standards.
This series of burners has four different models, with the output range of 26-330kW.All models of burners use components specially designed for CUSO series by CUSO. High quality manufacturing standards ensure the safe operation of the burner. In the process of continuously improving the burners of this series, the company pays special attention to reducing the noise of burners and facilitating the installation and adjustment of machines Try to minimize its volume, suitable for installation in any type of boiler available in the market. Two stage fire operation ensures the high performance of the burner.
